How to remake 100 magnets
Let's make an original magnet ♪

Magnets that are useful in refrigerators, desks, lockers, etc. Keeping a TODO list or message memo will increase the chances of seeing it, so if you have a favorite design, you will feel a little better.

For those who collect design paper, scraps, stickers, etc., we recommend a remake that changes the mount of the clear magnet that you can buy for 100 yen. This time, I will introduce the method using magnets of 100-yen shops "Daiso" and "Ceria".

Daiso's clear magnet

Daiso magnet
Click here for those who seek beauty

Daiso's 6-piece magnet is a type in which glass and magnet are glued together. It can be easily disassembled by soaking it in hot water that is slightly hotter than the bath.

How to remake Daiso magnet
Soak in hot water for a while

How to remake Daiso magnet
Can be peeled off

The mount attached to the magnet can be removed by rubbing it with your nails, but a thin film of adhesive remains on the glass side. This is a spatula and should be rubbed off with a strong force. I used a plastic ruler, but avoid something too hard to avoid damaging the glass.

How to remake Daiso magnet
Because the adhesive film remains

How to remake Daiso magnet
Scrape off with a plastic ruler, etc.

At the end, rub the whole on the tissue to make it shiny!

How to remake Daiso magnet
Rub the finish on the tissue

How to remake Daiso magnet
If you process this carefully, the finish will be beautiful.

Next, prepare a piece of paper or cloth to put in the magnet and attach it to the magnet with a woodworking bond. Depending on the material, the magnet below can be seen through, so it is safe to stick white paper on the mount.

How to remake Daiso magnet
Stick white paper on the back of the mount and stick it on the magnet. This is a cut out paper bag from Daiso.

When it dries, it finally adheres to the glass. Apply a glass repair bond that becomes transparent when it dries to the mount, and firmly press it against the glass to remove air bubbles. The author used Konishi's epoxy resin bond "Quick 5".

How to remake Daiso magnet
"Bond Quick 5" that mixes two agents

If you dry it without moving it, it's done! It takes a little work, but the texture of the glass is still attractive.

How to remake Daiso magnet
The chubby texture is wonderful

How to remake Daiso magnet
The one on the right has no paper pasted on the back of the mount. The magnet has seen through.

Ceria neodymium magnet

Ceria neodymium magnet
This is easy

Next is the method of using the "neodymium magnet" sold in Ceria. Although it is a small grain, it is a powerful magnet that can hold 5 sheets of copy paper.

This is just covered with a plastic cover, so you can easily remove it from the back with a cutter. Insert the cutting edge into the groove and open the lid of the milk bottle.

How to remake ceria magnet
Can be easily removed with the cutting edge of a cutter

How to remake ceria magnet
Disassembled into cover, mount, and magnet

Take out the paper inside, insert a mount of the same size, close it again, and you're done. It's difficult to choose a pattern because it's small, but it's very easy, so it might be a good idea to start from now on.

How to remake ceria magnet
Even if you put masking tape on the original mount

How to remake ceria magnet
Small and cute

A magnet remake with a moderate degree of difficulty that makes you crazy when you create it. How about playing at home during the rainy season?