"Show and store" your favorite mast ♪
Masking tape (maste) that does not stop when collected. Above all, you always want to see your favorite pattern. I found a case that can efficiently store such a mast at the 100-yen shop "Daiso", so I will introduce it.
The main body was clear, and there were two colors for the bar.
This is a product called "Stacking Maste Case (with cutter)". The main body size is 11 x 10.6 x 7 cm, and 5 rolls of masking tape with a width of 1.5 mm can be stored. The lid has a structure that opens in two stages, the front and the top, which is convenient like a "Pelican" storage case.
When setting the tape, open it all
When you take it out, you only have to open it in front of you. The lid can be fixed with it open
The bar through which the tape is passed can be adjusted in the front and back. It can be used properly according to the size of the masking tape.
Most masts can be stored if the bar goes through
Stacking between cases is also possible by matching the recesses on the lid (it is not completely fixed). It is also a nice point that the lower lid can be opened even if it is stacked.
Although it has a cutter, the sharpness is not good because it is made of the same material as the main body. The cut end will also be jagged, so if you're worried about it, it's a good idea to put scissors nearby.
A must-have case that can be stored like a collection case while protecting it from dust. If you see it, please check it out ♪