The packing of the window frame often has small molds because it is not usually noticeable. At the end of the year, I tried using a mold remover called "LOCTITE mold remover gel" that had been stored in the shelves.
LOCTITE mold removal gel
"LOCTITE mold removal gel" is a product developed by Henkel Japan. With a thin nozzle, it can be applied to mold with pinpoint. The gel is transparent, but it is mixed with very fine red particles, so you can immediately see where you applied it.
After applying it firmly, leave it for 3 to 6 hours for silicone joints and rubber packing, and for about 1 to 6 hours for tile joints. This time, after 3 hours, I wiped it with kitchen paper and wiped it with water. The result is ...?
This is a pretty good feeling! It has become so beautiful that it looks innocent from a distance. Black spots that have been around for several years have remained, so it is necessary to "do not leave them too much" in order to be effective.
Although it is an easy-to-use "LOCTITE mold remover gel", ventilation and wearing gloves, masks, protective goggles, etc. are essential. After use, you are required to wash your face and eyes in addition to washing your hands, so it will be smooth if you start without makeup.
Black mold in the house that makes you feel lighter if you can remove it even a little. How about putting it in the candidate as one of the easy-to-use mold removers? It is available on mail-order sites, and the price is around 800 yen.
Please also check " 100 uniform mold stain prevention masking tape " and " Latest detergent & prevention points for bath mold " posted earlier.