Handmade with milk carton and aluminum ♪ Thick panque mold --About 20 minutes in a frying pan, fluffy and moist [with recipe]

Easy handmade! Thick panque mold

Introducing how to make a thick panque mold using a milk carton and aluminum foil. It's easy to prepare and you can even bake a commercial panque mix like a cafe.

Raw materials	Milk carton, aluminum foil
What to use	Scissors, cutter
Working hours	10minutes

1.	Cut out one side surface (about 19.5 x 7 cm) of a milk carton (1 L).
2.	Cut it in half and make a 1-1.5 cm cut at each end.
3.	Insert the two notches in a staggered manner to form a long strip.
4.	Wrap the aluminum foil while leaving both ends.
5.	Roll it around and insert the notches at both ends in a staggered manner.
6.	Wrap the aluminum foil around the exposed milk carton while holding the seams, and you're done.

---

A big and thick panque is baked ♪ I will introduce how to make a panque mold using a milk carton and aluminum foil.

How to make a thick panque hot cake mold

material

・ Milk carton (1L)
·Aluminum foil

How to make

1. 1. Prepare a washed and dried milk carton (1L). Cut out one side surface (about 19.5 x 7 cm).


2. Divide the milk carton cut out in "1" into two equal parts. It is a calculation that can make two sheets with a size of about 19.5 x 3.5 cm.


3. 3. Make a notch of about 1 to 1.5 cm at both ends.


4. Insert the two notches in a staggered manner to form a long strip.



Five. Wrap the aluminum foil while leaving the notches on both ends. The point is to wrap it while stretching it tightly so that the aluminum foil does not wrinkle.




6. Roll it around and insert the notches at both ends in a staggered manner.


7. 7. Wrap the aluminum foil around the exposed milk carton while holding the seams, and you're done. It's a difficult task to do when it's curved, but you can get it clean by wrapping it around and adjusting the slack and wrinkles of the aluminum foil.




The finished hot cake mold is about 11 cm in diameter and about 3.5 cm in height. It keeps the circular shape firmly, though it is a little distorted. Next, I will introduce how to make thick panque using this instant hot cake mold.

Thick panque recipe

Material (for 2 sheets)

・ Hot cake mix (150g (5.29oz))
・ Egg (1 piece)
・ Milk (100cc)

How to make

1. 1. Apply a thin coat of vegetable oil to the inside of the panque mold.


2. Make the dough according to the notation on the panque mix bag.

3. 3. After heating, place the panque mold in a frying pan that has been placed on a wet cloth and slightly cooled. Apply a thin layer of oil to the frying pan or spread the frying pan foil as appropriate.


Four. Pour the dough into the mold for 5 to 6 minutes, cover and bake on very low heat for about 10 minutes.



Five. When the dough swells to the edge of the mold, turn it over (without removing the mold). Cover and heat on very low heat for another 4-5 minutes. Turn off the heat and wait for about 5 minutes, then remove from the frying pan and remove the mold.






The baked hot cake is impressive as it stretches vertically. The surface is dark brown and the sides are cream, so the contrast like pudding is cute. It has a solid brown color, but the inside is moderately moist and fluffy. Cut it into small pieces and enjoy it with plenty of butter and honey.



As for the hot cake type aluminum foil, it is recommended to use the one sold as a foil for frying pans. Silicone resin processing makes it easy to remove from the mold after baking. Also, thick panques are hard to turn back, so it is convenient to spread a frying pan foil when baking.


A handmade thick-baked hot cake mold that is easy to prepare and you can enjoy the feeling of a cafe at home. When the milk carton is empty, save it and give it a try. The time required to bake depends on the nature of the frying pan and stove, so please adjust while referring to the above recipe.